* Optional

• Intertie protection provided at the point of common coupling (PCC) between non-utillty distributed generation (DG) and the electric utility/area power system (Area EPS).
• Entering protection settings with confidence is easy with BESTCOMSPlus® software that provides intuitive settings with graphs, built-in error checking, and summary screens.
• Complex protection is easy to configure and understand with preprogrammed schemes, drag-and-drop logic, user labels, and notes provided by BESTlogic™Plus.
• The Offline Simulator in BESTlogic™Plus helps identify and troubleshoot the logic without the expensive need for physical hardware.
• Adaptable coordination for the most difficult applications made possible by 24 industry-standard timing curves and five user-defined curves.
• Dual primary zone application protection with optional second set of CTs.
• Islanding-detection protection and automatic load-shed schemes possible with the use of frequency elements.
• Meet your modern communications needs with 10/100Mbit copper or 100Mbit fiber-optic Ethernet with IEC 61850, DNP, or Modbus®.
• Connection is easy, even when using multiple large wires, with large screw terminals for all terminations.
• Get the information you need for system analysis with distance-to-fault, oscillography, demand metering, power quality, breaker monitoring, and other data provided by the BE1-11.
• Easily navigate settings and metering with the intuitive Human Machine Interface (HMI) menu and large LCD display.
• Customize displayed information to meet different application needs with user-definable indicators and labels.
• Direct control of internal logic using Select and Operate buttons available on the front panel.
• Optional RTD module with fully configurable analog outputs can be used to drive analog meters. Easily assigned trip points can be scaled by the user to reflect measured parameters.
• Up to 14 combined alarm and trip temperature monitoring points are possible using an optional RTD module.
• Reduce installation costs and improve reliability by mounting an optional RTD module near the point of measurement to minimize cable lengths.